Tecnoflon® FOR 9381 is a medium-viscosity, cureincorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 9381 is well-suited for all applications requiring better chemical resistance and/or long term heat resistance as compared to fluoroelastomer copolymers. Tecnoflon® FOR 9381 contains proprietary cure system and special process aid, providing superior processability for fast cycles and scorch safety.
Some of the basic properties of Tecnoflon® FOR 9381 are:
- Very good processability
- Excellent chemical resistance
- Low compression rate
- Good heat resistance
Tecnoflon® FOR 9381 can be used for compression, injection and transfer-molding of shaft seals, valve stem seals, gaskets, or any item requiring excellent chemical resistance. Tecnoflon® FOR 9381 can be combined with both the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 9381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® FOR 9381 are:
- Very good processability
- Excellent chemical resistance
- Low compression rate
- Good heat resistance
Tecnoflon® FOR 9381 can be used for compression, injection and transfer-molding of shaft seals, valve stem seals, gaskets, or any item requiring excellent chemical resistance. Tecnoflon® FOR 9381 can be combined with both the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two roll mills or internal mixers. Tecnoflon® FOR 9381 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
| Synonyms |
|---|
Fluorelastomer |
Markets
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|---|---|
| Elastomers | Fluorinated Elastomers | FKM |
Product Functions
- Low VOC
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Mineral/Synthetic Oil Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Low Compression Set
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Region of availability
- Africa & Middle East
- Asia Pacific
- Europe
- Not available in Latin America
- North America