TECNOFLON® FOR 9383 is a medium-high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 9383 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers and in any application requiring adhesion to metal. Tecnoflon® FOR 9383 contains proprietary cure system providing superior processability for fast cycles and scorch safety.
Some of the basic properties of TECNOFLON® FOR 9383 are:
Very good processability
Excellent chemical resistance
Good hot tear resistance
Good heat resistance
Good bonding to metal
Very good scorch safety
Tecnoflon® FOR 9383 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance.
This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
Tecnoflon® FOR 9383 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of TECNOFLON® FOR 9383 are:
Very good processability
Excellent chemical resistance
Good hot tear resistance
Good heat resistance
Good bonding to metal
Very good scorch safety
Tecnoflon® FOR 9383 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance.
This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
Tecnoflon® FOR 9383 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
| Synonyms |
|---|
Fluorelastomer |
Markets
Processing Method
- Calendering
- Compounding
- Compression Molding
- Extrusion
- Injection Molding
- Transfer Molding
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|
Product Functions
- Low VOC
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Mineral/Synthetic Oil Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Low Compression Set
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
Slab |
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America
TECNOFLON® FOR 9383 is a medium-high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68.5% fluorine content. Tecnoflon® FOR 9383 is well suited for all applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers and in any application requiring adhesion to metal. Tecnoflon® FOR 9383 contains proprietary cure system providing superior processability for fast cycles and scorch safety. Some of the basic properties of TECNOFLON® FOR 9383 are: - Very good processability - Excellent chemical resistance - Good hot tear resistance - Good heat resistance - Good bonding to metal - Very good scorch safety Tecnoflon® FOR 9383 can be used for compression, injection and transfer moulding of shaft seals, valve stem seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR 9383 can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.