TECNOFLON® NH is a high viscosity fluoroelastomer copolymer. Tecnoflon® NH is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® NH does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B.
Some of the unique properties of TECNOFLON® NH are:
Excellent compression set
Lack of mould fouling
Excellent mould release
TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
Finished goods can be produced by a variety of rubber processing methods.
Some of the unique properties of TECNOFLON® NH are:
Excellent compression set
Lack of mould fouling
Excellent mould release
TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
Finished goods can be produced by a variety of rubber processing methods.
| Synonyms |
|---|
Fluorelastomer |
Markets
Processing Method
- Compounding
- Compression Molding
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|
Product Functions
- Low VOC
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Mineral/Synthetic Oil Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Low Compression Set
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Adhesion
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
Slab |
Compliance Info
- WEEE
- RoHS Compliance
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America
TECNOFLON® NH is a high viscosity fluoroelastomer copolymer. Tecnoflon® NH is intended as a general purpose fluoroelastomer. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. Tecnoflon® NH does not contain curatives: therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve the required properties. It can be also cured with diamine based systems such as Tecnoflon® Tecnocin A and Tecnoflon® Tecnocin B. Some of the unique properties of TECNOFLON® NH are: - Excellent compression set - Lack of mould fouling - Excellent mould release TECNOFLON® NH can be used for compression moulding of O-rings, seals, gaskets and other items. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods.