TECNOFLON® FOR 5312K is a medium-low viscosity cure incorporated fluoroelastomer copolymer. This grade contains proprietary cure system and special processing aid providing superior processability. Tecnoflon® FOR 5312K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 5312K greatly reduces the reject rate due to adhesion and molding problems.
Some of the basic properties of Tecnoflon® FOR 5312K are:
Superior bonding to metal
Very good scorch safety
Outstanding processability
Lack of mold fouling
Excellent hot tear resistance
Excellent mold release
TECNOFLON® FOR 5312K can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
Some of the basic properties of Tecnoflon® FOR 5312K are:
Superior bonding to metal
Very good scorch safety
Outstanding processability
Lack of mold fouling
Excellent hot tear resistance
Excellent mold release
TECNOFLON® FOR 5312K can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.
| Synonyms |
|---|
Fluorelastomer |
Markets
Processing Method
- Calendering
- Compounding
- Extrusion
- Injection Molding
- Transfer Molding
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|
Product Functions
- Low VOC
- Good Glycol Resistance
- Bio-Fuel Resistant
- Fuel Resistant
- Mineral/Synthetic Oil Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Dielectric Properties
- Non Flammable
- Flame Retardant
- Low Compression Set
- Low CLTE
- UV Resistant
- Radiation (Gamma) Resistant
- Fast Cure
- Good Adhesion
- Good Mold Release
- Good Processing Stability
- Crosslinkable
- Low Temperature Flexibility
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
Slab |
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America
TECNOFLON® FOR 5312K is a medium-low viscosity cure incorporated fluoroelastomer copolymer. This grade contains proprietary cure system and special processing aid providing superior processability. Tecnoflon® FOR 5312K is designed to improve bonding in any application requiring adhesion to metal. In shaft seals or valve stem seals production, Tecnoflon® FOR 5312K greatly reduces the reject rate due to adhesion and molding problems. Some of the basic properties of Tecnoflon® FOR 5312K are: - Superior bonding to metal - Very good scorch safety - Outstanding processability - Lack of mold fouling - Excellent hot tear resistance - Excellent mold release TECNOFLON® FOR 5312K can be used for injection and transfer moulding of gaskets and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.