Zeniva® ZA-600 L is a lubricated grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied.
Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026.
The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc).
Zeniva® ZA-600 L is offered as resin pellets. An FDA MAF is available.
Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026.
The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc).
Zeniva® ZA-600 L is offered as resin pellets. An FDA MAF is available.
Markets
Chemical categories
| Chemical category | Chemical family | Chemical product |
|---|
Product Functions
- Biocompatible
- Halogen Free
- Bromine Free
- Low VOC
- High ESCR (Stress Crack Resist.)
- Good Dimensional Stability
- Alkali Resistant
- Alcohol Resistant
- Detergent Resistant
- Hydrolysis Resistant
- Low Moisture Absorption
- Good Impact Resistant
- Low CLTE
- Radiotranslucent
- Transparency
- Radiation (Gamma) Resistant
- Laser Weldable
- Low Warpage
- Good Processing Stability
- Carbon Fibre Reinforcement
- Autoclave Sterilizable (steam)
- E-beam Sterilizable
- Radiation Sterilizable
- Ethylene Oxide Sterilizable
- Heat Sterilizable
- Good Thermal Stability
- High Heat Resistant
Format
| Physical form |
|---|
Pellets |
Region of availability
- Not available in Africa & Middle East
- Asia Pacific
- Not available in Europe
- Not available in Latin America
- Not available in North America
Zeniva® ZA-600 L is a lubricated grade of polyetheretherketone (PEEK) offered for use in implantable devices. The manufacturing facility for Zeniva® PEEK in Alpharetta, GA is ISO 13485 registered and the relevant aspects of current Good Manufacturing Practices are also applied. Our biomaterial manufacturing processes are carefully validated, and enhanced controls provide product traceability. In addition, all materials are tested in a lab that is ISO 17025 accredited. This product meets the requirements of the current version of ASTM F 2026. The chemical, physical, and mechanical properties of finished parts are related to the processes utilized in producing the finished part (for example, molding, machining, annealing, sterilization, etc). Zeniva® ZA-600 L is offered as resin pellets. An FDA MAF is available.