What are you looking for?

LTM® 350 Tooling PrepregsLTM® 350 is a low temperature curing epoxy based tooling system optimised for both a rapid initial cure and post cure cycles

MTM® 28 SERIESMTM28 series prepregs are based on 120°C (248°F) curing toughened, epoxy matrix resins that have been specifically developed for the manu

Long Glass Fiber Thermoplastic. PPA base, 30% LGF. Improved F&W grade. Black

Eugenol synthetic is a typical strong clove note produced by chemical synthesis from guaiacol.

CYCOM 6102 Advanced CompositesA 350°F (177°C) Cure High-Heat Resistant Phenolic ResinFeatures and Benefits· High heat resistance· Good tack and dr

FM-5504 is a high-purity silica reinforced prepreg employing a MIL-R-9299 resin.

MXCE-55N MXCE-55N is carbonized rayon fabric impregnated with an elastomer modified phenolic resins suitable for use in Ablative applications.

Surfactants used in organoclay, biocide in disinfectant, sanitizers and antiseptics

Lauryl alcohol ethoxylate used as a wetting agent and emulsifier in agrochemical formulations.

Natural-based bioactivator adjuvant for glufosinate formulation;

FM® 400NA is a non-asbestos version of FM® 400 and is designed to provide similar performance to that of FM® 400 adhesive across the board. It is supplied with

Dapco™ 2100 is an adhesive, solvent-free, thixotropic silicone paste. Dapco™ 2100 is most commonly used as a coating

Dapco™ 2200 is an adhesive, two-component, solvent-free, thixotropic silicone paste.

BR® 6747-1NC and BR® 6747-1NCB primers are one-part, non-chromated, modified epoxy primers which contain no volatile organic compounds (VOCs).

L-303(LHR) ADHESIVE is a 250°F (121°C) curing, flame retardant, modified epoxy film. L-303(LHR) was designed to enhance the flame resistance of aircraft interio

L-303XL ADHESIVE is a 250°F (121°C) curing, flame retardant, modified epoxy film adhesive with high peel strength. L-303XL is intended to be used for structural

L-303XL ADHESIVE is a 250°F (121°C) curing, flame retardant, modified epoxy film adhesive with high peel strength.

CYCOM® 2035 is a variable curing modified epoxy resin developed for high performance applications.

Variable temperature, grey surface improvement film compatible with other VTM and some MTM systems. Supplied on a number of carriers/scrims. Cured under vacuum

MTM® 82S is a controlled flow, 135°C (275°F) curing phenolic resin matrix that exhibits excellent fire, smoke and toxicity performance to