Typical Properties
Polymist® and Algoflon® L PTFE micronized powders are free flowing powders used as additives in a wide range of materials such as thermoplastics, coatings and paints, inks, elastomers and lubricants (i.e., greases, oils, dry lubricants) to enhance processing or end-use performance characteristics.
Polymist® PTFE
| Properties | Units | F5 A R | F5 A EX R | F284 R | XPP 511 R |
|---|---|---|---|---|---|
| Color | White | White | White | White | |
| Specific surface area | m2/g | 3 | 3 | 3 | 2 |
| Average particle size D50 | µm | 4.0 | 13 | 9 | 20 |
| NPIRI grind max. value | NPIRI | 2.5 | - | - | - |
| Bulk density | g/L | 400 | 500 | 400 | 650 |
| First melting point | °C | 325±5 | 330±5 | 330±5 | 330±5 |
| Properties | Units | XPP 552 R |
|---|---|---|
| Color | White | |
| Specific surface area | m2/g | 3 |
| Average particle size D50 | µm | 3.3 |
| NPIRI grind max. value | NPIRI | 1.5 |
| Bulk density | g/L | 350 |
| First melting point | °C | 322±5 |
Algoflon® L PTFE
| Property | Units | L203 R | L206 R |
|---|---|---|---|
| Color | White | White | |
| Specific surface area | m2/g | >7.5 | >7.5 |
| Average particle size D50 | µm | 6.0 | 5.0 |
| Bulk density | g/L | 325 | 325 |
| First melting point | °C | 330±5 | 330±5 |
| Melt flow index @372°C, 10 kg, 2.09 mm die | g/10′ | 1.2 | 0.8 |
| Melt flow index @380°C, 3 kg, 1 mm die | g/10′ | - | - |
The products are manufactured by Syensqo Specialty Polymers (Changshu) Co., Ltd., and distributed by Syensqo in EMEA and Mexico and distributed by Changshu 3F Zhenfu New Material Co., Ltd. in the rest of the world. POLYMIST® and ALGOFLON® are trademarks of Changshu 3F Zhenfu New Material Co., Ltd.